Solder Pot Goot POT-22C

!±8± Solder Pot Goot POT-22C

Solder Pot Goot POT-22C A simple dish, all you need is a little pond wires and cables of various electronic components. Take the example of this tool by closing the POT-22C in the demand for Japanese brand Goot. The culmination of this device is the same pot, which is made from heat resistant stainless steel with ceramic coating. This material has been specially designed for the use of lead solder and lead, because they are not to their chemical composition. The longThe life of the plate is activated by a partial load mode by careful circuit design and the new 130-watt nichrome heating element facilitates. In addition to the dish is extremely easy to use. The unit is turned off at 220 V. After pressing the On / Off button, the pot is heated to a preset temperature can be adjusted with the aid of a special handle 270-520 degrees Celsius. If the dish is ready to turn the corresponding LED indicator. The LED display andon / off button is protected against accidental spillage of molten alloy plate with a heat-resistant silicone. Well, the solder in the pot and set the temperature for a maximum time needed to melt the solder for the decline - about 8-10 minutes. The plate of the device is 36 mm in diameter and 300 g of volume that is more than enough to tin the wires is very large electronic components, while the high operating temperature allows service enamelled copper wires...

Solder Pot Goot POT-22C

Bosch Dishwashers Compare Used Dehydrated Beef Jerky Saving Huggies Night Diapers